How To Make Louvered Window Shutters

Download Article

Download Article

Plantation shutters are unproblematic indoor shutters that cake sunlight and provide a decorative bear upon to windows. Composed of several horizontal slats, or 'louvers,' a fundamental 'tilt bar' that controls the movement of the louvers, two vertical stiles and 2 horizontal rails. Plantation shutters vary in size, shape and functionality. The steps below will teach you how to build plantation shutters by installing simple flat louvers within a shutter panel to be mounted onto a window frame.

Steps Download Article

1. one

   Measure your window frame. ^[1]

   • Begin with the four planks that volition serve as the shutter frame. Your shutter frame should be about .25 inches (or .6 cm) narrower than the window frame.

2. 2

   Cut the iv planks to size.

   Advertisement

3. 3

   Build the shutter frame by gluing the ii vertical planks to the two horizontal planks.

4. iv

   Measure the length of your flat louvers. The length of the louvers should be i/16th inch narrower than the opening between the 2 vertical stiles. The nylon louver pins that back up the louvers inside the frame take a washer that is molded into the pin and is i/32 inch in thickness. These washers foreclose the lovers from contacting the inside edges of the stile resulting in smooth action. How many louvers you use depends on the size of the louvers and console height.

5. 5

   Ideally, you should purchase louvers already fitted to size. If starting from scratch, remember to exit room to deeply attach pins with glue at either stop of the louvers. Flat louvers are typically 2.5 3.5 or 4.5 inches in width.

6. half-dozen

   Cut your louvers to size.

7. 7

   Marker along the within face up of the vertical stile on the shutter frame the spots where the louvers volition go in. The louvers should overlap by 1/4 inch. Take dandy care to line upwards the markings on either side of the frame so that the louvers will sit apartment.

8. 8

   Drill holes for the pins of the louvers on these markings. ^[2]

9. 9

   Insert the louvers by placing the pins into the holes in the shutter frame. If you're having problem getting the louvers in, drill the holes a chip deeper.^[iii]

10. 10

    Measure out and cut the tilt bar to stretch from the top horizontal plank to the lesser horizontal plank of the shutter frame. A wooden dowel that tin swivel hands is ideal.

11. 11

    Drill holes in the top and lesser horizontal planks to accommodate the tilt bar.

12. 12

    Insert the tilt bar into the holes.

13. 13

    Secure the tilt bar to the louvers by shutter staples or threaded eyelets. ^[4]

14. 14

    Exam the shutters by moving the tilt bar up and downwards and observing the movement of the louvers.

15. 15

    Mountain the shutter frame onto the window frame and secure it by screws or another method. ^[5]

    Advertisement

Add New Question

• Question

  Where can I find shutter molding to brand plantation shutters?

  

  The type you can go depends on where yous alive. Larger cities will take more options for y'all. Home stores, specialty lumber yards, and fifty-fifty your local lumber yard will accept what you want or volition exist able to club it for yous.

Inquire a Question

200 characters left

Include your email accost to become a message when this question is answered.

Submit

Advertizement

• Indoor shutters look much nicer when stained or painted. You can paint the individual louvers later Footstep half dozen or stain the whole shutter frame after Stride fourteen.

• If making shutters for a larger window or a series of windows, use several panels of shutters. Follow the instructions above for each panel and attach the panels by gluing or screwing their frames together.

• Many people prefer elliptical or tapered louvers to apartment louvers. These louvers function the same every bit apartment louvers. Fabricating elliptical louvers will crave a moulding auto and moulding knives ground to profile.

• Computer programs be to aid in the construction of plantation shutters. These programs, also know as Shutter Cut Sail Programs, simply crave the builder to enter the dimensions of the shutter they wish to build. The Cut Sail Program provided a list of components with measurement to build the shutter.

Thanks for submitting a tip for review!

Advertisement

• Authentic measurements are essential to well-functioning shutters, peculiarly at Pace 7. Re-check your measurements after installing a louver or two and brand sure they overlap as you want.

Advertisement

Things You'll Need

• Forest louvers
• Nylon louver pins or modest forest dowels
• Two wood Rails
• Two woods Stiles
• Wood dowels or screws
• Tape measure
• Saw
• Drill
• Shutter staples or threaded eyelets
• Shutter Hinges

About This Article

Thanks to all authors for creating a page that has been read 184,213 times.

Did this article help you?

Source: https://www.wikihow.com/Build-Plantation-Shutters

Posted by: thackerrensell.blogspot.com

Share this post